====== Rabbit BOX ======

**Rabbit Box** is a **total precision** device that provides all the essential functions to achieve the best results in regularity rallies.

It is a recommended device for asphalt rallies on open roads.

{{:images:image-73.png}}

With the Rabbit Box, the co-driver can adjust the measurements in real time with centimeter precision! Adjustments are made easily with the [[en:rabbit-rally-2-0-competidores:equipos-y-precision:mando-coche|remote buttons]] without having to touch the screen.

==== Connections ====

The Rabbit Box supports two types of connections, but it all depends on your Rabbit Box number. Older Rabbit Boxes with a number lower than 1000 can only be connected via Bluetooth, and modern Rabbit Boxes with a number higher than 1000 only allow connection via Wi-Fi.

==== Wi-Fi Connection ====

  - Turn on the **Rabbit Box**.
  - Restart the co-driver's tablet.
  - Enable Wi-Fi and connect to the **Rabbit Box** network (e.g.: RabbitBox1000).
  - Open the **Rabbit Rally 2.0** app on the co-driver's tablet.
  - Open the Connections screen.
  - Click on Sensor 1, 2 or on the Average (S1 and S2).
  - Click Yes to confirm.
  - Enter your **Rabbit Box** number, which is written on the yellow label, and press OK to confirm.

==== Bluetooth Connection (older models) ====

  - Turn on the **Rabbit Box**.
  - Restart the co-driver's tablet.
  - Enable GPS (Location) and Bluetooth.
  - Open the **Rabbit Rally 2.0** app on the co-driver's tablet.
  - Open the Connections screen.
  - Click on Sensor 1, 2 or on the Average (S1 and S2).
  - Click Yes to confirm.
  - Enter your **Rabbit Box** number, which is written on the yellow label, and press OK to confirm.

<WRAP box notegreen>
If you wish to use another tablet/phone as a driver screen, follow the steps at this [[en:rabbit-rally-2-0-competidores:navegacion:pantalla-piloto|link]].
</WRAP>