====== Start Time ======

Elements of the Start Time screen.

{{:images:elementospantallahoradesalida1al7-es.png}}

<WRAP box noteyellow>
  - Start Time
  - Manual start (gets the current day and time)
  - Set the time for the next 30s (e.g.: 11:28:30)
  - Set the time for the next 1m (e.g.: 11:29:00)
  - Select the rally day
  - Option to reset the odometer when saving the data
  - Save start time
</WRAP>

To configure the start time we depend on the information provided by the rally organization, which can be: **Digital roadbook** or **Average speed table**.

==== Digital roadbook ====

<WRAP box noteyellow>
<WRAP indent>
1. Open the menu and select Navigation ([[en:rabbit-rally-2-0-competidores:navegacion:pantallas-de-navegacion|Roadbook screen]]). \\
2. Click on the red clock.
</WRAP>
</WRAP>

{{:images:roadbookdigital2-es.png}}

<WRAP box noteyellow>
<WRAP indent>
3. Enter the start time. \\
4. Verify the rally day. \\
5. Click on Save Start Time.
</WRAP>
</WRAP>

{{:images:elementosdepantallahorasalida3al5-es.png}}

<WRAP box noteyellow>
<WRAP indent>
6. Place the car at the start location. \\
7. Reset the odometer by clicking on the blue rabbit. \\
8. Wait for your start time and Go!
</WRAP>
</WRAP>

{{:images:elementosdepantallahorasalida7y8-es.png}}

<WRAP box notegreen>
For **Monte Carlo** start, simply click on the red rabbit of the corresponding stage and follow the same steps described above. To make it easier you can use the +30s or +1m buttons, depending on the rally regulations.
</WRAP>

<WRAP danger>
**Important! If for any reason the rally organization changes the start time of the rally or a stage, you can change it simply by clicking on the corresponding red clock and following the same steps described above.**
</WRAP>

==== Average speed table ====

If the rally organization only provided the average speed table, we have two options to configure the start time. Either by pre-configuring the start time for each stage as described in the [[en:rabbit-rally-2-0-competidores:rabbit-rally-primeros-pasos:editor-de-tramos-basico|Stage Editor (Basic)]], or by adjusting it on the navigation screen.

To adjust the start time on the navigation screen, just follow the steps below.

<WRAP box noteyellow>
  - Open the menu and select Navigation ([[en:rabbit-rally-2-0-competidores:navegacion:pantallas-de-navegacion|Reg. Numbers screen]]).
  - Click on the chronometer.
</WRAP>

{{:images:tablademedias2_es.png}}

<WRAP box noteyellow>
<WRAP indent>
3. Enter the start time. \\
4. Verify the rally day. \\
5. Click on Save Start Time.
</WRAP>
</WRAP>

{{:images:tablademedias3al5-es.png}}

<WRAP box noteyellow>
<WRAP indent>
6. Place the car at the start location. \\
7. Reset the odometer by clicking on it. \\
8. Wait for your start time and Go!
</WRAP>
</WRAP>

{{:images:tablademedias7y8-es.png}}