====== Clock Synchronisation ======

It is very important that you synchronise the Rabbit’s clock with the official race clock, as this will ensure that all time-based calculations are correct. To do this, follow the steps below.

  - Go to the official race clock.
  - On the Rabbit, open the ‘Clock Sync’ screen.

{{images:sinc-reloj-es.png?400|}}

<WRAP box noteyellow>
<WRAP indent>
3. Click on the “GPS: dd/mmm hh:mm:ss” button (e.g. GPS: 16/MAR 12:41:36) to perform an automatic synchronisation. \\
4. Auto Sync by GPS: the tablet’s clock may drift by a few tenths of a second over the course of the rally. This tool will adjust any clock delays during the rally using the GPS signal. If the rally time does not exactly match the GPS time, this setting will maintain the difference between the manually entered time and the GPS time to resolve the tablet’s issue.\\
5. If necessary, fine-tune the settings using the adjustment buttons. \\
6. To make the adjustment easier, you can enable the ‘beep per second’ option, as when you look at the official clock you can hear the sound from your mobile. \\
</WRAP>
</WRAP>

<WRAP danger>
**Important! The clocks must be identical in all respects: hours, minutes and seconds.**
</WRAP>

<WRAP caution>
**Recommendations:** 

  * Bring a digital stopwatch as a backup
  * If you restart the tablet, check that the time is still correct. In some cases, it may be off by 1 or 2 seconds. 
  * Disable the tablet’s automatic time setting
</WRAP>