====== Rabbit Test (EN) ======

{{images:rabbit-test.png}} 

[[https://drive.google.com/uc?export=download&id=1zLZ49UMYHkA-dl7LQV3SciVi8rxP-Keg|DESCARGAR]]

\\

It is a free application for testing the performance of the **Rabbit** and get to know all its functions. It runs on Windows and allows you to test its features from your home computer.

The **Rabbit Test** simulates the connection of the odometer to a probe. With the buttons  **"ADJUST/LAP" BUTTONS** buttons (yellow) **and the green and red buttons (+) and (-)** buttons, which emulate the **Rabbit Box,** you can try out the **Rabbit Rally** as if you were in a real **real rally situation.** 

**How to use the RabbitTest**\\
- Check the box **"Auto Pulse" checkbox** to have the system send pulses automatically\\
- Controls the parameter **"Real Speed" parameter** in the control bar.

In the **RabbitBox Simulator**:\\
- Press the button **"ADJUST/LAP" BUTTON** ( yellow)\\
- Add metres: **green buttons +1m or +10**\\
- Remove metres: **red buttons -1m or -10m**\\
- Confirm the correct measurement and press the "ADJUST" button (yellow).

==== REQUIREMENTS FOR USING THE RABBIT TEST: ====

  * Download the Rabbit Test
  * Download Rabbit 2.0
  * Windows computer (for downloading the Rabbit Test)
  * Tablet or mobile phone (to download the Rabbit Test)

==== HOW TO CONNECT: ====

  * Before connecting the **Rabbit** to **Rabbit Test,** make sure the computer and tablet are connected to the same wifi network.
  * When opening the Rabbit Test for the first time **Rabbit Test,**  click **OK** in the message box requesting authorisation for "Network connections".
  * With the **Rabbit Test** open on the computer, open Rabbit on the mobile or tablet.
  * On the **"Connections" screen** check the box **"Rabbit Test" checkbox**
  * You will be prompted to enter the **IP** of the device that is running the Rabbit Test. This information can be viewed directly in the Rabbit Test. The correct IP is probably from the wireless network or LAN.
  * To confirm the connection: click on **"Fake Pulse** and see if the **Rabbit** receives the first pulse.