Table of Contents

Rabbit BOX

Rabbit Box is a total precision device that provides all the essential functions to achieve the best results in regularity rallies.

It is a recommended device for asphalt rallies on open roads.

With the Rabbit Box, the co-driver can adjust the measurements in real time with centimeter precision! Adjustments are made easily with the remote buttons without having to touch the screen.

Connections

The Rabbit Box supports two types of connections, but it all depends on your Rabbit Box number. Older Rabbit Boxes with a number lower than 1000 can only be connected via Bluetooth, and modern Rabbit Boxes with a number higher than 1000 only allow connection via Wi-Fi.

Wi-Fi Connection

  1. Turn on the Rabbit Box.
  2. Restart the co-driver's tablet.
  3. Enable Wi-Fi and connect to the Rabbit Box network (e.g.: RabbitBox1000).
  4. Open the Rabbit Rally 2.0 app on the co-driver's tablet.
  5. Open the Connections screen.
  6. Click on Sensor 1, 2 or on the Average (S1 and S2).
  7. Click Yes to confirm.
  8. Enter your Rabbit Box number, which is written on the yellow label, and press OK to confirm.

Bluetooth Connection (older models)

  1. Turn on the Rabbit Box.
  2. Restart the co-driver's tablet.
  3. Enable GPS (Location) and Bluetooth.
  4. Open the Rabbit Rally 2.0 app on the co-driver's tablet.
  5. Open the Connections screen.
  6. Click on Sensor 1, 2 or on the Average (S1 and S2).
  7. Click Yes to confirm.
  8. Enter your Rabbit Box number, which is written on the yellow label, and press OK to confirm.

If you wish to use another tablet/phone as a driver screen, follow the steps at this link.