Rabbit Test (EN)

It is a free application for testing the performance of the Rabbit and get to know all its functions. It runs on Windows and allows you to test its features from your home computer.

The Rabbit Test simulates the connection of the odometer to a probe. With the buttons “ADJUST/LAP” BUTTONS buttons (yellow) and the green and red buttons (+) and (-) buttons, which emulate the Rabbit Box, you can try out the Rabbit Rally as if you were in a real real rally situation.

How to use the RabbitTest
- Check the box “Auto Pulse” checkbox to have the system send pulses automatically
- Controls the parameter “Real Speed” parameter in the control bar.

In the RabbitBox Simulator:
- Press the button “ADJUST/LAP” BUTTON ( yellow)
- Add metres: green buttons +1m or +10
- Remove metres: red buttons -1m or -10m
- Confirm the correct measurement and press the “ADJUST” button (yellow).

REQUIREMENTS FOR USING THE RABBIT TEST:

Download the Rabbit Test
Download Rabbit 2.0
Windows computer (for downloading the Rabbit Test)
Tablet or mobile phone (to download the Rabbit Test)

HOW TO CONNECT:

Before connecting the Rabbit to Rabbit Test, make sure the computer and tablet are connected to the same wifi network.
When opening the Rabbit Test for the first time Rabbit Test, click OK in the message box requesting authorisation for “Network connections”.
With the Rabbit Test open on the computer, open Rabbit on the mobile or tablet.
On the “Connections” screen check the box “Rabbit Test” checkbox
You will be prompted to enter the IP of the device that is running the Rabbit Test. This information can be viewed directly in the Rabbit Test. The correct IP is probably from the wireless network or LAN.
To confirm the connection: click on “Fake Pulse and see if the Rabbit receives the first pulse.