Connections

On the Connections screen you choose where the distance measured by the Roadbook Designer comes from. To open it, tap Connections in the Main Menu.

Get odometer from

GPS (Km/h): uses the GPS of the phone or tablet, in kilometres.
GPS (MPH): uses the GPS, in miles.
RabbitBox: the old Bluetooth Rabbit Box units.
RabbitBox v2: the Wi-Fi Rabbit Box units. Choose S1, S2 or Average (the average of both sensors).
Rabbit PRO: choose S1, S2, Average or GPS (the Rabbit PRO's internal high-precision GPS).
RabbitConnect: connection to another device by IP address (S1, S2, Average or GPS).
Steps (Mts/Min): for measuring on foot. Each press of the headset button counts one step.

Select the option and tap Connect. The connection status appears below. For a RabbitBox v2, the Designer asks for your Rabbit Box number.

Which option should I choose?

To measure the rally as precisely as possible, use the sensors of the Rabbit PRO or the Rabbit Box, and calibrate them before you start.
For the Calibration stage, use the Rabbit PRO GPS with R = 1.

The Designer keeps two calibrations: one R for the phone GPS and another R for all the other connections (Rabbit Box, Rabbit PRO, RabbitConnect and Steps). After changing the connection, always check the R on the calibration screen.