This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Clock Synchronization ====== It is very important that you synchronize the Rabbit clock with the official event clock, as this will ensure that all time-based calculations are correct. To do this, follow the steps below. - Go near the official event clock. - In the Rabbit, open the "Clock Sync" screen. {{:images:sinc-reloj-es.png?400|}} <WRAP box noteyellow> <WRAP indent> 3. Click the “GPS: dd/mmm hh:mm:ss” button (e.g. GPS: 16/MAR 12:41:36) to perform an automatic synchronisation. \\ 4. Auto Sync by GPS will adjust any clock delays during the race using the GPS signal. \\ 5. If necessary, make fine adjustments with the adjustment buttons. \\ 6. To make the adjustment easier, you can enable the "beep per second" option, so while looking at the official clock you can hear the sound from your phone. \\ </WRAP> </WRAP> <WRAP danger> **Important! The clocks must be identical in all parameters: hours, minutes and seconds.** </WRAP> <WRAP caution> **Recommendations:** * Carry a digital stopwatch as backup * If you restart the tablet, check if the time remains correct; in some cases it may vary by 1 or 2 seconds when restarting the device. * Disable automatic time adjustment on the tablet </WRAP> en/rabbit-rally-2-0-competidores/rabbit-rally-primeros-pasos/sincronizar-reloj.txt Last modified: 2026/03/16 14:39by joan