Rabbit Test [Rabbit Docs]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Rabbit Test ======

{{:images:rabbit-test.png}}

[[https://drive.google.com/uc?export=download&id=1zLZ49UMYHkA-dl7LQV3SciVi8rxP-Keg|DOWNLOAD]]

\\

It is a free application to test the operation of the **Rabbit** and learn about all its features. It runs on Windows and allows you to test its features from home with a computer.

**Rabbit Test** simulates the connection of the odometer to a sensor. With the **"ADJUST/LAP"** (yellow) button **and the green and red (+) and (-) buttons** that emulate the **Rabbit Box** remote, you can test **Rabbit Rally** as if you were in a **real rally situation.**

**How to use the RabbitTest**\\
- Check the **"Auto Pulse"** box so that the system sends pulses automatically\\
- Control the **"Real Speed"** parameter in the control bar.

In the **RabbitBox Simulator**:\\
- Press the **"ADJUST/LAP"** button (yellow)\\
- Add meters: **green buttons +1m or +10**\\
- Remove meters: **red buttons -1m or -10m**\\
- Confirm the correct measurement and press the "ADJUST" (yellow) button.

==== REQUIREMENTS TO USE RABBIT TEST: ====

  * Download Rabbit Test
  * Download Rabbit 2.0
  * Computer with Windows system (to download Rabbit Test)
  * Tablet or phone (to download Rabbit)

==== HOW TO CONNECT: ====

  * Before connecting the **Rabbit** to **Rabbit Test,** make sure the computer and the tablet are connected to the same Wi-Fi network.
  * When opening **Rabbit Test** for the first time, click **OK** on the message box requesting authorization for "Network Connections".
  * With **Rabbit Test** open on the computer, open the Rabbit on the phone or tablet.
  * On the **"Connections"** screen, check the **"Rabbit Test"** box.
  * You will be asked to enter the **IP** of the device running Rabbit Test. This information can be seen directly in Rabbit Test. The correct IP is probably from the wireless or LAN network.
  * To confirm the connection: click on **"Fake Pulse"** and check if the **Rabbit** receives the first pulse.