GPS and Garmin GLO

The internal GPS is the GPS of your phone or tablet and has the worst precision among all options, but it is fine for getting started in regularity. The precision can vary between 4 and 15 meters depending on the device you use.

To use it, you must make sure this feature is enabled on your phone. To do this, go to “Settings” > “Location” and enable the location feature. On Android devices, you must verify that it is in High Accuracy mode.

The Garmin GLO is a very good external GPS device.

To connect your device to a Garmin GLO you must do the following:

iOS (iPhone or iPad) Simply connect the Garmin GLO in the bluetooth device list.

Android The connection to an Android device is a little different and requires a couple of additional steps and an extra app. You will need to download an application called Rabbit Connect, which can be found in the Google Play Store. Once you have installed the application, follow these steps:

1. Open the Rabbit Connect app
2. Select Garmin GLO and wait for it to connect
3. Open the Rabbit Rally 2.0 app
4. Go to the connections screen and select Rabbit Connect
5. Wait for the connection and
6. On the Rabbit Rally 2.0 connections page, select Km/h (Metric) or MPH (Imperial) under GPS, as shown in the image below.

Connections Screen