Settings
On the Settings screen you can adapt the Rabbit to the way you navigate. To open it, open the menu and select “Settings”. Changes are saved immediately, there is nothing to confirm.
These are all the options, in the same order as they appear on the screen:
| Option | What it does | Default |
|---|---|---|
| Work with 10m | The odometer and its corrections work in multiples of 10 metres. | Off |
| Sound Alert | Beeps when you are late or early compared to the ideal time. | On |
| Undo Adjust | After each odometer correction, shows a blue box for a few seconds so you can undo it with a single tap. See Options Menu. | Off |
| Blink background | The screen background blinks when you are late or early, so you can see it without looking directly at the screen. | Off |
| Silent Mode | Turns off all sounds and voices in the app. | Off |
| Ideal Time Limit | Margin, in seconds, within which you are considered on time. Controls the sound alert and the yellow colour of the Time to Ideal. | 0.5 s |
| Show Hundredths of Seconds | Shows hundredths in the Time to Ideal when you are between -2 s and 2 s. For experienced users. | Off |
| Max Gauges Speed | Maximum speed on the gauge scale of the Gauge Regularity screen. | 80 |
| Confirm when reset odometer | Asks for confirmation before setting the odometer to zero. | On |
| Save Logs | Records how the stage went so you can analyse it later. See Logs. | Off |
| Save Logs Interval | How often, in seconds, a record is saved in the logs. | 1 s |
| New Speed Calculation | Calculates the speed from the pulses, with advanced filtering. Turn it off to go back to the classic distance/time method. | On |
| Fast Rabbit Pilot | Fast data sending to the Pilot Screen. If the Pilot Screen disconnects for no reason, turn this option off on the main Rabbit and restart the app. | On |
| Min GPS Speed to Count Distance | Below this speed (km/h) the GPS does not add distance. Increase it if the odometer counts metres while you are stopped. | 2 |
| Auto adjust by GPS position | Corrects the odometer automatically when you pass references with GPS coordinates from the digital roadbook (RBK) or from your own references. See Reference Editor (Automatic GPS Adjustment). | On |
| Auto Adjust Km Tolerance | Maximum difference, in km, between your odometer and the reference for the automatic adjustment to happen. Avoids jumps on looped routes. | 1 km |
| Auto Adjust By Gps Ratio | Radius, in metres, around each reference within which the automatic adjustment happens. | 10 m |
| Change Control Buttons Corrections | Changes how many metres each green and red button of the Car Control adds or subtracts. | +1, -1, +10, -10 |
| Language | App language. | Phone language |
| Units | Speed units: Km/h, MPH or mts/min. | Depends on the country |
| Non-Cumulative Rally | Adds a “Check point distance” field to the Start Time screen. When you save, the stage is recalculated to start from that distance and that time. | Off |
| Edge-to-Edge Display (Android only) | Uses the whole screen, including the status bar area. Turn it off if the status bar or navigation bar covers part of the app. You need to restart the app. | On |
Recommendations:
- If it is your first rally, keep the default options. They are designed for most regularity rallies.
- Before the event, turn on Save Logs. After the rally you will be able to review your adjustments and times.
- If you use the driver's phone as the Pilot Screen, turn on Blink background on that device. The driver will see if they are late or early without taking their eyes off the road.