Rabbit Test

DOWNLOAD

It is a free application to test the operation of the Rabbit and learn about all its features. It runs on Windows and allows you to test its features from home with a computer.

Rabbit Test simulates the connection of the odometer to a sensor. With the “ADJUST/LAP” (yellow) button and the green and red (+) and (-) buttons that emulate the Rabbit Box remote, you can test Rabbit Rally as if you were in a real rally situation.

How to use the RabbitTest
- Check the “Auto Pulse” box so that the system sends pulses automatically
- Control the “Real Speed” parameter in the control bar.

In the RabbitBox Simulator:
- Press the “ADJUST/LAP” button (yellow)
- Add meters: green buttons +1m or +10
- Remove meters: red buttons -1m or -10m
- Confirm the correct measurement and press the “ADJUST” (yellow) button.

• Download Rabbit Test
• Download Rabbit 2.0
• Computer with Windows system (to download Rabbit Test)
• Tablet or phone (to download Rabbit)

• Before connecting the Rabbit to Rabbit Test, make sure the computer and the tablet are connected to the same Wi-Fi network.
• When opening Rabbit Test for the first time, click OK on the message box requesting authorization for “Network Connections”.
• With Rabbit Test open on the computer, open the Rabbit on the phone or tablet.
• On the “Connections” screen, check the “Rabbit Test” box.
• You will be asked to enter the IP of the device running Rabbit Test. This information can be seen directly in Rabbit Test. The correct IP is probably from the wireless or LAN network.
• To confirm the connection: click on “Fake Pulse” and check if the Rabbit receives the first pulse.